Claber 90915 Rain Sensor

$50.00 (as of October 14, 2017, 8:28 pm)

From the manufacturer: Suitable for all watering systems, the rain sensor avoids unnecessary wastage of water by turning the sprinklers off when it is raining. The sensor is connected to the common solenoid valve (24 V) or to the Aquauno timers.(not included timer)
When the internal flow reaches a level of 5 mm of rain per square metre, the system shuts down. Programmed watering automatically resumes when the water in the sensor evaporates. The rain sensor should be installed in an outdoor area exposed to rain using the stainless steel bracket provided.
From the manufacturer: Fixing: supplied with pivoting wall bracket

Usually ships in 1-2 business days

Description

Rain sensor that mechanically interrupts the irrigation program when it rains and starts it again, at the set hour, when the rain has stopped. Equipped with spike that prevents leaves from unintentionally dropping onto the sensor, guaranteeing the utmost operating reliability. Easily installed outdoors on the specific steel bracket and it connects easily by means of cable to the water timer. Suitable for all watering systems, the rain sensor avoids needless wastage of water by turning the sprinklers off when it’s raining. The sensor is attached to the common solenoid valve (24 V) or to the Aquauno timers. When the internal go with the flow reaches a level of 5 mm of rain per square metre, the system shuts down. Programmed watering mechanically resumes when the water in the sensor evaporates. The rain sensor must be installed in an outside area exposed to rain the use of the stainless steel bracket provided.
From the manufacturer: Suitable for all watering systems, the rain sensor avoids needless wastage of water by turning the sprinklers off when it’s raining. The sensor is attached to the common solenoid valve (24 V) or to the Aquauno timers.(not included timer)
When the internal go with the flow reaches a level of 5 mm of rain per square metre, the system shuts down. Programmed watering mechanically resumes when the water in the sensor evaporates. The rain sensor must be installed in an outside area exposed to rain the use of the stainless steel bracket provided.
From the manufacturer: Fixing: supplied with pivoting wall bracket
From the manufacturer: Body: ABS
From the manufacturer: Net weight: 150g

Reviews

There are no reviews yet.

Be the first to review “Claber 90915 Rain Sensor”

Your email address will not be published. Required fields are marked *